![background image](http://html.mh-extra.com/html/smc-networks/6750l2/6750l2_management-manual_1300657084.webp)
C
ONFIGURING
THE
S
WITCH
2-54
Setting the Default Priority for Interfaces
You can specify the default port priority for each interface on the switch.
All untagged packets entering the switch are tagged with the specified
default port priority, and then sorted into the appropriate priority queue at
the output port.
Command Usage
•
This switch provides four priority queues for each port. It uses
Weighted Round Robin to prevent head-of-queue blockage.
•
The default priority applies if the incoming frame is an untagged frame
received from a VLAN trunk or a static-access port. This priority does
not apply to IEEE 802.1Q VLAN tagged frames. If the incoming
frame is an IEEE 802.1Q VLAN tagged frame, the IEEE 802.1p User
Priority bits will be used.
•
If the output port is an untagged member of the associated VLAN,
these frames are stripped of all VLAN tags prior to transmission.
Command Attributes
•
Default Priority
– The priority that is assigned to untagged frames
received on the specified port. (Range: 0 - 7, Default: 0)
•
Number of Egress Traffic Classes
– The number of queue
buffers provided for each port.
Summary of Contents for 6750L2
