SMC Networks 6750L2, Management Manual

Page: 240 / 272

C
OMMAND
L
INE
I
NTERFACE
3-128
map ip precedence (Global Configuration)
Use this command to enable IP precedence mapping (i.e., IP Type of
Service). Use the
no form to disable IP precedence mapping.
Syntax
map ip precedence
no map ip precedence
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.
Example
The following example shows how to enable IP precedence mapping
globally:
map ip precedence (Interface Configuration)
Use this command to set IP precedence priority (i.e., IP Type of Service
priority). Use the
no form to restore the default table.
Syntax
map ip precedence ip-precedence-value cos cos-value
no map ip precedence
• precedence-value - 3-bit precedence value. (Range: 0-7)
Console(config)#map ip precedence
Console(config)#