manualshive.com logo in svg

SMC Networks 6750L2, Management Manual

The SMC Networks 6750L2 is a feature-rich networking device that guarantees seamless connectivity. For a hassle-free installation, download the free Installation Manual from our website, providing step-by-step instructions and ensuring optimal performance. Unlock the full potential of your product and access the manual effortlessly at manualshive.com.

Share
Download
background image

1-1

C

HAPTER

 1

S

WITCH

 M

ANAGEMENT

Connecting to the Switch

Configuration Options

The TigerSwitch 10/100 SMC6750L2 includes a built-in network 
management agent. The agent offers a variety of management options, 
including SNMP, RMON and a Web-based interface. A PC may also be 
connected directly to the switch for configuration and monitoring via a 
command line interface (CLI).

Note:

The IP address for this switch is assigned via DHCP by default. To 
change this address, see “Setting an IP Address” on page 1-6. 

The switch’s HTTP Web agent allows you to configure switch parameters, 
monitor port connections, and display statistics graphically using a 
standard Web browser such as Netscape Navigator version 6.2 and higher 
or Microsoft IE version 5.0 and higher. The switch’s Web management 
interface can be accessed from any computer attached to the network.

The switch’s management agent is based on SNMP (Simple Network 
Management Protocol). This SNMP agent permits the switch to be 
managed from any system in the network using management software, 
such as such as SMC’s free EliteView software.

The CLI program can be accessed by a direct connection to the RS-232 
serial console port on the switch, or remotely by a Telnet connection over 
the network. 

Summary of Contents for 6750L2

















































































































































































































































































Reviews:

No comments

Related manuals for 6750L2

D-Link xStack DGS-3612G series Reference Manual preview
xStack DGS-3612G series
Brand: D-Link Pages: 546
D-Link xStack DGS-3400 Series User Manual preview
xStack DGS-3400 Series
Brand: D-Link Pages: 326
D-Link xStack DGS-3612G series Cli Manual preview
xStack DGS-3612G series
Brand: D-Link Pages: 493
D-Link xStack DGS-3400 Series Cli Reference Manual preview
xStack DGS-3400 Series
Brand: D-Link Pages: 540
D-Link DXS-3326GSR - xStack Switch - Stackable Reference Manual preview
DXS-3326GSR - xStack Switch - Stackable
Brand: D-Link Pages: 354
D-Link TM DES-6500 Command Line Interface Reference Manual preview
TM DES-6500
Brand: D-Link Pages: 267
H3C S3100 Series Command Manual preview
S3100 Series
Brand: H3C Pages: 1089
H3C S9500E Series Connecting Manual preview
S9500E Series
Brand: H3C Pages: 13
H3C S9500E Series Security Configuration Manual preview
S9500E Series
Brand: H3C Pages: 207
H3C S3100-52P Operation Manual preview
S3100-52P
Brand: H3C Pages: 62
I/O Interconnect SV142P1 User Manual preview
SV142P1
Brand: I/O Interconnect Pages: 27
NTI UNIMUX-nXm-UHD Installation And Operation Manual preview
UNIMUX-nXm-UHD
Brand: NTI Pages: 69
3onedata IES6200-PN-16T4GS-2P48 Quick Installation Manual preview
IES6200-PN-16T4GS-2P48
Brand: 3onedata Pages: 3
Cross Technologies 1582-650 Instruction Manual preview
1582-650
Brand: Cross Technologies Pages: 11
ETS SM8-RC Instructions preview
SM8-RC
Brand: ETS Pages: 2
socomec SIRCO 27DC3011 Quick Start Manual preview
SIRCO 27DC3011
Brand: socomec Pages: 6
DVIGear DVI-4121 User Manual preview
DVI-4121
Brand: DVIGear Pages: 11
asas Motoroll Manual preview
Motoroll
Brand: asas Pages: 25

Brands by name

Popular brands

Load more brands