background image

Smarty

MADS

Page 2 of 16

                  THIS IS A HIGH PERFORMANCE PRODUCT USE AT YOUR OWN RISK

                                          This product is intended for OFF ROAD USE ONLY
                                        This product is not intended to be used to break the law

Do not use this product until you have read the following agreement.
This agreement sets forth the terms and conditions for the use of this product.

The  installation  of  this  product  indicates  that  the  buyer  has  read  and  understands  this  agreement  and  accepts  the
terms and conditions.

DISCLAIMER OF LIABILITY

MADS

, it’s distributors, jobbers and dealers ( hereafter Seller ) shall be in no way responsible for the product’s proper uses

and service.  THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS.

The buyer acknowledges that he is not relying on the Sellers skill or judgement to select of furnish goods suitable for any
particular  purpose  and  that  there  are  no  liabilities  which  extend  beyond  the  description  on  the  face  hereof,  and  the  buyer
hereby  waivers  all  remedies  or  liabilities  expressed  or  implied,  arising  by  law  or  otherwise  (  including  without  any
obligation of the seller with respect fitness, merchantability and consequential damages ) whatever or not occasioned by the
sellers negligence.

The Seller disclaims any warranty and expressly disclaims any liability for personal injury and damages.    The
buyer acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this
agreement and the buyer agrees to indemnify the Seller and to hold the Seller harmless from any claim related to
the  item  of  the  equipment  purchased.    Under  no  circumstances  will  the  seller  be  liable  for  any  damages  or
expenses by reason of use or sale of any such equipment.

The Seller assumes no liability regarding the improper installation or misapplication of its products.
It is the installers responsibility to check for proper installation and in doubt contact the manufacturer.

The buyer is solely responsible for all warranty issues from the manufacturer.

LIMITATION OF WARRANTY

MADS

 ( Hereafter Seller ) gives Limited Warranty as to description, quality, merchantability, and fitness for any particular

purpose, productiveness, or any other matter of the Seller’s product sold herewith.  The Seller shall be in no way responsible
for the products proper use and service and the buyer hereby waives all rights other than those expressly written herein. This
warranty shall not be extended, altered or varied except to be a written instrument signed by Seller and Buyer.

The warranty is limited to one ( 1 ) year from the date of sale and limited solely to the parts contained within the products
kit.  All products that are in question of warranty must be returned prepaid to the Seller and must be accompanied by a dated
proof of purchase receipt.  All Warranty claims are subject to approval by MADS.

Under no circumstances will the Seller be liable for any labour charged or travel time incurred by in
diagnosis for defects, removal, or reinstallation of this product or any other contingent expenses.

Under no circumstances will the Seller be liable for any damage or expenses incurred by reason of the  use or sale of any
such equipment.

In  the  event  that  the  buyer  does  not  agree  with  this  agreement:  THE  BUYER  MAY  PROMPTLY  RETURN  THIS
PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE TO THE PLACE OF
PURCHASE WITHIN TEN (10) DAYS FROM THE DATE OF PURCHASE FOR A FULL REFUND.

THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND
UNDERSTANDS THIS AGREEMENT AND ACCEPTS THE TERMS AND CONDITIONS.

Summary of Contents for MADS S-06

















Reviews: