Smarty
MADS
Page 12 of 16
Turn key OFF
Press ‘>’
Pressing the ‘>’ key, Smarty asks you to turn on the ignition key to retry the connection:
Turn key ON
Press ‘>’
When the connection has been established, Smarty shows the key-on counter:
Key cnt: 567
Press ‘>’
Please remember that everytime the key is switched off, as at the end of the programming, the key-on
counter increases.
6.
Reading DTC’s
Reading Diagnostic Trouble Codes
The DTC (Diagnostic Trouble Code) reader function present in Smarty Micro Tuner is for convenience
purpose only.
MADS makes no warranty to the accuracy of the interpretations.
The description of all the DTC is shown on Smarty’s display.
Many logged codes are transitory, they are automatically reset.
From the main menu, press the ‘2’ key to select the data read function.
1=ECM/ABS Update
2=Data Read
From the data read menu, press the ‘2’ key to select this function.
1=Key-on counter
2=DTC codes
Smarty will try to establish communication with the ECM.
If the Key was not turned into the on position Smarty will display this message:
Turn key OFF
Press ‘>’
Pressing the ‘>’ key, Smarty asks you to turn on the ignition key to retry the connection:
Turn key ON
Press ‘>’
When the connection has been established, if no DTC codes are present, the following screen appears:
No DTC stored
Press ‘>’
If one or more DTC’s are stored, Smarty shows the number of DTC’s present with the following
screen:
8 DTC present
Press ‘>’
