Smarty
MADS
Page 13 of 16
With the keys ‘<’ and ‘>’ all the present DTC codes can be displayed, one code at a time with the
following screen:
DTC #1 – P0108
MAP sensor volta
The first line of display shows the DTC “P” code. The second line shows the DTC code description. If
the DTC code description is longer that the physical dimension of the display, the description will
scroll across the screen.
Clearing DTC codes
At the end of the DTC code list, Smarty can either clear all the stored DTC codes from the ECM
memory or exit:
1=Clear DTC
2=Exit
Press the ‘1’ key, to clear all the DTC codes stored in the ECM.
Press the ‘2‘ key, the DTC codes will not be erased and Smarty will return to the main screen
.
When the erasing operation has been completed, the following screen appears:
DTC Cleared
Press ‘>’
7.
ABS Update
Tire height update
Once Smarty is VIN# Locked (i.e. a CaTCHER software has been loaded in the ECM) the speedometer
of the vehicle can be adjusted according to the tire height.
From the main menu, shown below, press the ‘1’ key.
1=ECM/ABS Update
2=Data Read
To change the tire height, choose the ABS update function:
Press the ‘2’ key, in the second menu as shown below:
1=ECM Update
2=ABS Update
Smarty will try to establish the communication with the ABS.
If the ignition key was not turned to the “RUN” position Smarty will display this message:
Turn key OFF
Press ‘>’
Press the ‘>’ key, then Smarty will prompt you to turn on the ignition key to retry the connection:
Turn key ON
Press ‘>’
When the connection has been established, Smarty shows the current tire height (Curr Tire:) in the top
line of the screen:
Curr.Tire:40.00”
New Tire:__.__”
