OPERATION – Main Unit
12
Recording Modes
Normal (Continuous): Commences recording immediately after the device
boots and continues until power off. Data will be stored in the [normal] folder
under the specific channel.
Event: Depending on settings, records when triggered by motion detection,
digital inputs 1 ~ 3, and G-sensor activities for a set amount of pre and post
seconds. A long beep will sound when activated and the blue LED will blink
rapidly while recording. Data will be stored in the [event] folder under the
specific channel.
Panic: Records when [Panic] button is pressed for a set amount of pre and
post seconds. A long beep will sound when activated and the blue LED will
blink rapidly while recording. Data will be stored in the [panic] folder under
the specific channel.
Dual: Performs all recording mode options.
Parking: During normal or dual modes, when the vehicle is stationary for
more than 5 minutes, the device will switch to parking mode and record at 1
FPS until the vehicle starts moving.
Event, panic, normal data are saved separately when set to respective
modes. When events or panics are triggered during normal recording
mode, data is not recorded separately but marked on the normal data
and can be searched for during playback.
1. To start, make sure that the power cable is properly connected and SD
card is plugged in securely. BX4000 will power on automatically when car
ignition is turned on.
2. The blue LED will illuminate solid for about 20 seconds and then blink
quickly for about 10 seconds while the back-up power system is being
charged. When complete, a beep will sound and the blue LED will blink
slowly noting that it is operational.
3. The default recording is normal and at this setting, recording will start
once BX4000 is operative. Recording mode can be changed on the PC
Viewer settings menu.
Start
www.car-solutions.com
Car-Solutions.com
