APPENDIX (Firmware Upgrade)
Make [program] folder at SD root folder as below,
First, upgrade the BX4000 main unit,
Second, install new PC viewer software on your PC,
and then initialize the SD card using new PC viewer software.
Copy “BX4000_X.X.X.bin” file in to the SD card [program] folder.
.
1. Preparing Firmware
2. Upgrade BX4000
Insert the prepared SD card to BX4000 Series and turn on the power.
The Blue & Red LED will be quickly blink while the unit is upgrading.
It will also “Beep” continuously, Upgrading the unit usually takes about
2 to 3 minutes.
Warning: Do not turn off the power during upgrading.
If the upgrade fails, the “BX4000” unit should be returned to your
local distributor.
Once the upgrading is finished, the unit will automatically turn off and on the
power.
[NOTE] To get the upgrade firmware, please contact your local
distributor. New firmware is released occasionally by D-TEG.
If BX4000 records as normal, turn off the power.
Insert the SD card into your PC and initialize it using the software once
you have successfully tested the unit.
42
www.car-solutions.com
Car-Solutions.com
