HARDWARE INSTALLATION cont’d (CALIBRATION)
13
Hold the two buttons until you hear beeping and blue LED
flashing. Press any single button to escape.
Park vehicle on a flat surface with at least 50 meters of space
directly ahead. When ready press panic button once.
If G-Sensor calibration is
successful, press any
button or wait 30 seconds
to reboot.
If G-Sensor calibration
failed, retry.
Move directly forward slowly accelerating until beeping
speed changes.
9) After installation, calibrate the internal G-Sensor for accurate readings.
This process detects the installed direction of the BX4000. A monitor (sold
separately) is required for calibration.
Press and hold [PANIC] & [SHUTTER] button together and then power on.
(turn on ignition). Follow instructions on monitor.
This G-Sensor calibration is needed at first use and whenever repositioned.
Panic Button
Shutter Button
10) With the monitor connected, check if all the cameras are working and the
angle of view covers the desired areas for recording
www.car-solutions.com
Car-Solutions.com
