OPERATION
14
PANIC RECORD BY PANIC BUTTON
The panic recording by [PANIC] button will start by pressing the [PANIC] button
with one short “Beep” sound. Blue LED will be blinking during the panic
recording.
BX4000 doesn’t make a separate panic file during the continuous recording.
It will mark the panic area by [PANIC] button in the continuous recording file
which can be easily searched for during playback.
SNAPSHOT RECORD BY SHUTTER BUTTON
When in need of a snapshot from camera 1, either for installation or for
evidence collection, press the [SHUTTER] button once. A short beep will
sound and a snapshot of 1 image with 5 seconds audio will be recorded into
the [memo] folder which can be viewed through the PC Viewer. The
snapshot.jpg in the [snapshot] folder is typically used for installation report
purposes and is the latest snapshot taken.
SYSTEM ERROR INDICATOR
When a system error is detected, the following chart shows the alarm
indicators.
Beep
Blue LED
Red LED
Camera error
0.5 sec
1 sec
1 sec
Panic folder full
2 sec
OFF
Continuous
SD Card error
Continuous
1 sec
0.5 sec
To disable the alarms, press the [Panic] button. Recording may not
resume and the alarms will continue after rebooting if corrections are not
made.
www.car-solutions.com
Car-Solutions.com
