OPERATION
1. To start, make sure that the power cable is properly connected and SD
card is plugged in securely. Turn the car ignition on to activate the device.
2. The blue LED will illuminate solid for about 20 seconds and then blink
quickly for about 10 seconds while the back-up power system is being
charged. When complete, a beep will sound and the blue LED will blink
slowly noting that it is operational.
3. Recording will depend on mode settings. The default mode is normal
(continuous) recording but this can be changed to event or dual recording
mode on the PC Viewer device settings menu.
4. The event recording will automatically begin when triggered by Motion
Detection, Alarm1 to 3 or by the G-sensor and will begin with one short
“Beep” sound.
5. The panic recording can be started by pressing the [PANIC] button.
12
www.car-solutions.com
Car-Solutions.com
