Smartwatch H20SWDVR16, Operation Manual, Page: 64 / 181

SmartWatch DVR Operation Manual
63
Figure 5.32 Encoding Record
2) Select Camera you want to configure.
3) Check the checkbox of the Redundant Record .
4) Click Apply to save settings and return to the upper level menu.
Repeat the above steps (2-4) for configuring other channels.
5.8 Configuring HDD Group for Record
Purpose:
You can group the HDDs and save the recorded files in certain HDD groups.
Steps:
1. Enter HDD setting interface.
Menu>HDD
Figure 5.33 HDD-General
2. Select Advanced on the left bar.
Check if the storage mode of the HDD is Group. If not, set it to Group. For detailed information, please
refer to Chapter 10.4 Managing HDD Group .
3. Select General in the left bar.
Click to enter editing interface.
4. Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click Apply and then in the pop-up message box, click Yes to save your settings.
3) Click OK to return to the upper level menu.
Repeat the above steps (3-4) to configure more HDD groups.
5. Choose the Channels which you want to save in the HDD group.
1) Select Advanced on the left bar.