Smartwatch H20SWDVR16, Operation Manual, Page: 30 / 181

SmartWatch DVR Operation Manual
29
Multi-screen
Switch to multi-screen live view mode.
The multi-screen icon varies according to the device models.
Normal Record Start all-day normal recording for all channels.
Motion Detection
Record
Start motion detection recording for all channels.
Playback Play back recorded video.
Aux Monitor
Switch to the auxiliary output mode and disable the main output.
If you enter Aux monitor mode and the Aux monitor is not connected,
mouse operation will be disabled; you will then need to switch back to the
Main output by pressing the VOIP/MON button and Enter button on the IR
remote control.
Output Mode Set the video output mode to Standard, Bright, Gentle or Vivid.
Quick NetSet Quick settings of the network parameters, e.g., DDNS, UPnP™ and DHCP.
Previous Screen Switch to the previous screen.
Next Screen Switch to the next screen.
Start/Stop Auto-
switch
Enable/disable auto-switching of the screens.
The dwell time of the live view configuration must be set before using
Start Auto-switch .
If the corresponding camera supports intelligent functions, the Reboot Intelligence option is included
when right-clicking the mouse on this camera.
3.2.3 Using an Auxiliary Monitor
Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to the single full screen by choosing channel number from the dropdown list.
•
Multi-screen: Adjust the screen layout by choosing from the dropdown list.
•
Main Monitor: Switch to the Main Output mode and disable the auxiliary output.
•
Menu Output Mode : Switch the menu output mode to HDMI/VGA, Main CVBS or Auto.
•
Output Mode : Select the video output mode to Standard, Bright, Gentle or Vivid.
•
Previous Screen: Switch to the previous screen.
•
Next Screen: Switch to the next screen.
In the live view mode of the main output monitor, the menu operation is not available while Aux output
mode is enabled.
3.2.4 Main/Aux Output Switching
When the HDMI/VGA output is configured as the main output, you can perform the following operation to