Smartwatch H20SWDVR16, Operation Manual, Page: 31 / 181

SmartWatch DVR Operation Manual
30
switch to CVBS output as the main output.
Steps:
1. In the live view mode, use the mouse wheel to double-click on the HDMI/VGA output screen, and the
following message box pops up:
Figure 3.2 Main/Aux Monitor Switch
2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to
cancel the operation.
3. Select the Menu Output Mode to Main CVBS from the right-click menu on the CVBS output screen.
4. On the pop-up message box, click Yes to restart the device to enable the CVBS output as the main output.
You can switch the Menu Output Mode under Menu>Configuration>More Settings to Auto or
HDMI/VGA and then restart the device to switch the main output back to HDMI/VGA output.
3.2.5 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which appears when you right-click the mouse on
the screen.
Figure 3.3 Quick Settings Toolbar
Table 3.4 Description of Quick Setting Toolbar Icons
Icons Description Icons Description Icons Description
Enable Manual
Record
Instant Playback Mute/Audio on
PTZ Control Digital Zoom Image Settings
Close
Instant Playback
Instant Playback shows video recorded five minutes prior to clicking the button. If no video is
displayed, it means there is no recorded video from the last five minutes.