Smartwatch H20SWDVR16, Operation Manual, Page: 55 / 181

SmartWatch DVR Operation Manual
54
5.3 Configuring Motion Detection Record
Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event
takes place, the device can analyze it and perform actions as a response. Enabling motion detection function can
trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notify the
surveillance center and so on. In this chapter, you can follow the steps to schedule a recording which is triggered
by the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
Figure 5.12 Motion Detection
2. Configure Motion Detection:
1) Choose camera you want to configure.
2) Check the checkbox after Enable Motion Detection .
3) Drag and draw the area for motion detection using the mouse. If you want to set motion detection
up for the full screen, click Full Screen . To clear the motion detection area, click Clear .
Figure 5.13 Motion Detection- Mask
4) Click Handling , and a window will pop up.