Smartwatch H20SWDVR16, Operation Manual, Page: 42 / 181

SmartWatch DVR Operation Manual
41
on to the next preset. The presets can be set following the steps above in Customizing Presets .
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Select patrol number.
3. Select the under Patrol option box to add key points (presets) for the patrol.
Figure 4.6 PTZ- Add Key Point
4. Configure key point parameters, such as the key point no., duration of stay for the key point and the
speed of the patrol. The key point is corresponding to the preset. The Key Point No. determines the
order which the PTZ will follow while cycling through the patrol. The Duration refers to the time span
to stay at the corresponding key point. The Speed defines the speed at which the PTZ will move from
one key point to the next.
Figure 4.7 Key point Configuration
5. Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.
You can also delete all the key points by clicking the trash icon