Smartwatch H20SWDVR16, Operation Manual, Page: 113 / 181

SmartWatch DVR Operation Manual
112
8.4 Detecting Video Tampering
Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Steps:
1. Enter Video Tampering interface of Camera Management.
Menu> Camera> Video Tampering Detection
Figure 8.14 Video Tampering Detection Setup Interface
2. Select a channel on which you want to detect video tampering.
3. Check the checkbox of Enable Video Tampering Detection .
By default, the video tampering detection is configured in full screen.
4. Move the sensitivity bar and choose the appropriate sensitivity level.
5. Click the icon of Handling to enter the Handling interface.
6. Set the arming schedule and alarm response actions. Please refer to Step 4 and Step 5 of Chapter 8.1
Setting up Motion Detection Alarm.
7. If you want to set video loss handling method for another channel, repeat above steps or click Copy to
copy the above settings to the new channel.
Figure 8.15 Copy Settings of Video Tampering