SmartWatch® IP Network Camera User Manual
70
70
Figure 9-12
Restore Default Settings
After restoring the default settings, the IP address will also be defaulted.
9.6.3
Exporting/ Importing Configuration File
Steps:
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or
Configuration > Advanced Configuration> System > Maintenance
1.
Click
to save the configuration file of the current device.
2.
Click
to select the saved configuration file and then click
to start importing configuration file.
You need to reboot the camera after importing a configuration file.
9.6.4
Upgrading the System
Steps:
1.
Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or
Configuration > Advanced Configuration> System > Maintenance
2.
Click
to select the local upgrade file and then click
to
start remote upgrade.
The upgrading process will take 1 to 10 minutes. Please don't disconnect power from the
camera during this process. The camera will reboot automatically after upgrading.
