SmartWatch® IP Network Camera User Manual
51
51
3.
Click
to save the settings.
5.6.6
Email Sending Triggered by Alarm
The system can be configured to send an Email notification to all addresses if an
alarm event is detected, e.g., motion detection event, video loss, tamper, etc.
Before you start:
Please configure the DNS Server settings under
Basic Configuration >
Network >
TCP/IP
or
Advanced Configuration >
Network > TCP/IP
before using the Email
function.
Steps:
1.
Enter the
TCP/IP Settings (
Configuration > Basic Configuration >
Network > TCP/IP
or
Configuration > Advanced Configuration >
Network > TCP/IP)
to set the IPv4
Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server.
Please refer to
Section 5.3.1
Configuring TCP/IP Settings
for detailed information.
2.
Enter the Email Settings interface:
Configuration > Advanced Configuration > Events > Email
Figure 5-36
Email Settings
