SmartWatch® IP Network Camera User Manual
36
36
5.4
Configuring Video and Audio Settings
5.4.1
Configuring Video Settings
Steps:
1.
Enter the Video Settings interface:
Configuration >Basic Configuration >
Video / Audio > Video
Or
Configuration > Advanced Configuration >
Video / Audio > Video
Figure 5-19
Configure Video Settings
2.
Select the
Stream Type
of the camera main stream (normal), or sub-stream.
The main stream is normally used for recording and live viewing with good
bandwidth, and the sub-stream can be used for live viewing when the bandwidth
is limited (mobile device).
3.
You can customize the following parameters:
Video Type
:
Select the stream type to video stream, or video & audio composite stream. The
audio signal will be recorded only when the
Video Type
is
Video & Audio
.
Resolution:
Select the resolution of the video output.
Bitrate Type:
Select the bitrate type to constant or variable.
Video Quality:
When bitrate type is selected as
Variable
, 6 levels of video quality are selectable.
Frame Rate:
Set the frame rate to 1/16~25 fps. The frame rate is to describe the frequency at
which the video stream is updated and it is measured by frames per second (fps).
A higher frame rate is advantageous when there is movement in the video stream,
as it maintains image quality throughout.
