SmartWatch® IP Network Camera User Manual
39
39
image horizontally and vertically. It can be used to view the image in the way you see
it directly using your eyes.
WDR:
Wide dynamic range can be used when there is a high contrast of the bright area and
the dark area of the scene.
BLC Area:
BLC area is the area sense the light intensity; Close, Up, Down, Left, Right and Center
are selectable.
White Balance:
The below figure shows the white balance options. You can select
according to the camera conditions. For example, if there is a fluorescent lamp in the
scene, select Fluorescent Lamp.
Figure 5-22
White Balance
Digital Noise Reduction:
Close, Normal Mode and Expert Mode are selectable.
Noise Reduction Level:
For adjusting the noise reduction level (only valid when the DNR function is enabled).
Scene Mode:
Select it as indoor or outdoor.
HLC:
High light function can be used when there are strong lights in the scene which affect
the image quality.
Grey Scale:
Select the range of the grey scale as [0-255] or [16-235].
Corridor mode:
To make a complete use of the 16:9 aspect ratio, you can enable corridor mode when
the camera is installed in a narrow position.
When installing, turn the camera to the 90 degrees or rotate the 3-axis lens to 90
degrees, and set the corridor mode as on, you will get a normal view of the scene
with 9:16 aspect ratio to ignore the needless information such as the wall, and get
more meaningful image.
5.5.2
Configuring OSD Settings
Configure the camera’s name and time position on the screen.
Steps:
1.
Enter the OSD Settings interface:
