9
3.1.2 Installing the system
LOCATION OF THE STATION
The following aspects are to be considered when selecting a mounting location for the station:
- Check that an intruder willing to reach the station is forced to use an exit protected by a magnetic detector or
must walk in front of an infrared detector.
- The station must be mounted near a telephone socket or the BOX.
- The station must be placed out of sight of potential intruders and in a safe location, which can be easily
accessed for maintaining the system.
- In order to eliminate the risk of electromagnetic disturbances, do not place the station at a distance of less than
1 meter from big objects or metallic devices, refrigerators, washing machines, high-voltage wires, electric
boards, etc.
- In order to ensure the best possible reception, the mounting height above the ground should be at least of
1.5 m.
- The station must be mounted on a solid flat surface to ensure the optimum closing of the self-protection switch
on the rear side. It must be mounted at a height of 1.5 to 2 m at a place which is visible daily.
- It is recommended to place the station in such a way that the signal emitted during the entry/exit can be heard
from outside the building.
Note: It is important to keep the station out of reach of young children.
MOUNTING THE STATION
1. Use the template at the end of this manual to mark
hole positions on the wall. Drill 4 holes of 6 mm
2. Attach the metal plate on the 2 lower holes, allowing
the upper screws protrude 5-6 mm.
3. Open the compartment at the rear panel of HA700.
