18
5.
FUNCTION SUMMARY TABLE
Procedure on the
station
Function
Function description
1 2 3 4 + 0 1
Triggering mode #1
The station rings and the transmitter will call the
programmed numbers.
1 2 3 4 + 0 2
Triggering mode #2
The station does not ring and the transmitter will call
the programmed numbers.
1 2 3 4 + 0 3
Test mode
The station emits a "ding-dong" upon receipt of a
detection or self-protection signal.
Push
8
for 3 s.
Enables/disables the exterior siren
Push
9
for 3 s.
Calls the first phone number.
1 2 3 4 + 0 4
Alarm duration
Determines the alarm duration. 1 or 3 minutes
1 2 3 4 + 0 5
Frequency saturation
Detects radio interferences.
1 2 3 4 + 0 6
Entry delay
Determines the entry delay. 0 or 15 s
1 2 3 4 + 1
Total arming
Arms the whole system (Area 1 + Area 2)
1 2 3 4 + 2
Partial arming
Arms part of the system (Area 1)
1 2 3 4 + 3
Chime mode
The station emits a chime in case of detection.
1 2 3 4 + 4
Disarming
Disables the station.
1 2 3 4 + 5
Alert message
Saves the alert message (max 6 seconds)
1 2 3 4 + 6
Personal code
Modifies the personal code.
1 2 3 4 + 7
Programming phone numbers
Registering telephone numbers to call in case of an
alarm.
1 2 3 4 + 8
Key beeps
Enables or disables a beep when keys are pressed.
1 2 3 4 + 9
Suppressing phone numbers
Deletes all the phone number saved in the station.
1 2 3 4 + *
Programming accessories
To program accessories.
1 2 3 4 + #
Deleting accessories
Deletes accessories.
NOTE:
Code 1234 is default code. If you have set a personal code,
then you have to use this code.
