12
3.1.6 Alarm delay
It is about the working time of the built-in siren when an alarm is triggered. The delay can be set on 1, 2 or 3 minutes.
To change the alarm delay:
- Enter the factory code
1234
(or your personal code).
- Then push the keys
0
and then
4
, a long beep will be emitted and the STATUS LED will flash.
- Choose the alarm delay.
- Push the key 1 for 1 minute OR the key 2 for 2 minutes OR the key 3 for 3 minutes, one confirmation beep will
be emitted.
NOTE:
The alarm delay is 1 minute by default.
3.1.7 Frequency saturation
The station has a radio interference detection device on its frequency, for interferences likely to disturb connections
with its accessories.
To enable/disable the function:
- Enter the factory code
1234
(or your personal code).
- Then push the keys
0
and then
5
, a long beep will be emitted and the STATUS LED will flash.
- Push the key
1
to enable OR the key
2
to disable the function, a confirmation beep will be emitted.
NOTE:
The frequency saturation function is disabled by default.
3.1.8 Key beeps
You can disable the station key beeps by typing
1234
(or your personal code), followed by
8
.
To reactivate beeps, you just have to follow the same procedure.
NOTE:
The key beep function is enabled by default.
