HAT162 ATS Controller User Manual Page 6 of 21
4.
OPERATION
4.1
FRONT PANEL DESCRIPTION
Fig.1 Front Panel Description
4.2
KEY FUNCTION DESCRIPTION
Table 3 Keys Description
Icon
Function
Description
Auto (Set)
Auto/Manual mode switch;
Enter into lamp test status by pressing for 3s;
Enter into parameter configuration mode by pressing for 8s.
1# Close (Increase)
1# close in manual mode;
Adjust parameters in parameter configuration mode.
2# Close (Decrease)
2# close in manual mode;
Adjust parameters in parameter configuration mode.
Test (Confirm)
It is active in manual mode;
While genset start signal is active, press it can deactivate the genset
start signal;
While genset start signal is inactive, press it can active the genset
start signal;
Confirm user-defined parameters in parameter setting screen.