ALC404 LIGHTING TOWER CONTROLLER USER MANUAL
ALC404 Lighting Tower Controller 2018-11-06 Version 1.1 Page 7 of 83
─
Generator with over voltage, under voltage, over frequency, under frequency, and over current
functions; mains with over voltage, under voltage, over frequency and under frequency functions;
─
Detect DC voltage, current, and power while controlling of DC light tower set;
─
Precise collect generator parameters as below,
Temperature(programmable)
°
C/°F
Engine oil pressure (programmable) kPa/bar/psi
Fuel level (programmable) % Fuel left L
Engine speed r/min(RPM)
Starter battery voltage V
D+ voltage of charger V
Accumulated start times
Accumulated running time
Currently running time
─
Precise real-time clock and real-time calendar functions allow scheduled start/stop (every day, every
week, every month and custom week), sunrise and sunset start/stop light tower set; moreover,
scheduled start time, running duration time, sunrise time and sunset time can be set by users as
users’
wish;
─
Remote start/stop function;
─
Manual start/stop control of light tower set and manual on/off control of lighting lamps;
─
Standard USB communication port makes it easier to communicate with PC and faster to configure
parameters; network monitoring can be achieved via USB port;
─
CANBUS interface can connect with J1939 EFI engine, which can not only monitor the normal data of
EFI engine (like water temp., oil pressure, speed, and fuel consumption), but also control gen-set
start/stop and rise/drop seed via CANBUS port.
─
Mains can supply power for controller lighting lamps or manual on/off control of lighting lamps.
─
Gen-set running accumulation and output energy accumulation functions convenient for users to
regular maintenance and fuel consumption statistics;
─
Scheduled start time and various delays can be set on the spot and also comes with password
protection in case of laypeople disoperation.
─
ALC404 controller can control up to 4 lamps and 4 feedback indicators were be fitted on the panel. In
addition, the turn on interval time between two lights can be set by users.
