6
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
2.3.1.
Power Input
The
Power Input
connector, as shown in Figure 1, is located near the lower right corner of the
HPSC front panel. All devices require an external 12V
– 24V DC supply for operation (specified
in
chapter 2.1 - Mechanical and Electrical Specifications
Pin#
Description
Type
Phoenix Contact
MSTB 2,5/ 3-ST-5,08
+
Power Supply (+12 to 24V DC)
-
Power GND
PE
Protective Earth
Table 5: Power connector description HPSC-Series
2.3.2.
Trigger Inputs
To physically trigger the strobe controllers by an external synchronization source, each device
provides a count of input trigger lines (TRG), by a connector described in Table 6.
Pin#
HPSC1
HPSC1 v2
HPSC2
HPSC4
Connector
Type
Phoenix Contact
MSTB 2,5/ 2-ST-5,08
Phoenix Contact
MSTB 2,5/ 4-ST-5,08
Phoenix Contact
MSTB 2,5/ 8-ST-5,08
TRG+
Trigger Channel n +
TRG -
Trigger Channel n -
Table 6: Trigger input connector description HPSC-Series
The electrical ratings, operation limits as well as the device internal circuitry are described in
Table 7 and Figure 2 below.
+ -
PE
TRG1 TRG2 TRG3 TRG4
+
- + - + - + -
TRG1 TRG2
+ - + -
TRG
+
-
