3
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
2. HPSC-Series
2.1. Mechanical and Electrical Specifications
Specification
HPSC1
HPSC1 v2
HPSC2
HPSC4
Output channels
1
1
2
4
Asynchronous Operation
-
-
Full timing independent
channels
Operating Modes
Continuous, External Trigger, Internal Trigger,
Software Trigger, External Switch
Max. Voltage
48V (pulsed/continuous)
Max Current
40A @ 48V (per channel)
up to 160A @ 48V (in total)
Current Resolution
down to 1mA
Max. continuous current
4A @ 24V
(without heat sink,
max. 25°C ambient)
5A @ 24V
(with heat sink)
4A @ 24V
(per channel)
up to 5A @ 24V
(in total)
Pulse output range
1µs
– 1000ms,
1µs resolution
1µs
– 60s, 1µs resolution
Maximum frequency
(External Trigger)
4,9kHz
50kHz
Maximum frequency
(Internal Trigger Generator,
External Switch Mode)
997Hz
25kHz
Trigger input
Opto-isolated, HIGH at 3V
– 24V; positive or negative edge
Trigger output
Open-collector,
max. 30V / 50mA
Opto-isolated, max. 30V / 50mA
Control
Ethernet
(10Base-T),
RS-232 or
USB1.x/2.0
Ethernet (10Base-T/100Base-TX)
RS-232 or USB1.x/2.0 on request
Input Power requirements
12V
– 24V DC (min 11V, max 26V) at max. 6.5A
Power consumption
Max. 150W (depending on load)
Housing
Black anodized aluminum case
External dimensions
(H / W / L)
39 x 88 x 103
[mm]
39 x 88 x 103
[mm]
39 x 88 x 103
[mm]
45 x 130 x
124 [mm]
Weight (approx.)
270g
285g
297g
635g
Storage temperature
(ambient)
From -30°C/-22°F up to +80°C/+176°F
Operating temperature
(ambient)
From -5°C/+23°F up to +50°C/+122°F
Relative humidity
From 25% up to 80% (non-condensing)
Conformity
CE, FCC, RoHS2
Table 2: HPSC1, HPSC1 v2, HPSC2 and HPSC4 - Mechanical and electrical specifications
