l
By default encryption is disabled which means the
communication is not secure. In case you want to
have a secure communication, ensure that the WEP
encryption setting for airBridge are the same as that
of Access Point.
l
To set the encryption keys click on security tab :
l
Select the Encryption Key(64Bit/128Bit).
l
Select HEX & enter hex data.
l
Select the desired key to be used(Default
Key).
l
Save the WEP Keys....
l
You will get a pop up window with the
message :
'WEP Encryption Keys Saved Successfully'.
Site Survey
l
Click on Site Survey tab :
l
Select Infrastructure Mode
l
Check "Select From Available Access Point".
l
Double click on the desired Access Point.
l
You will see the message "Device is
successfully Associated…"
l
Use antenna alignment tool while adjusting the
antenna to get better link.
l
The TxRx LED will be lighted after successful
