airBridge Outdoor and Access Point are in line of sight without any obstruction. Select the most
appropriate place on the roof which will provide a direct view to the Access Point. Secure a 1.5 inch
steel pipe vertically and insure that it cannot come off with wind force.
MOUNTING THE airBridge Outdoor
Fix the airBridge Outdoor unit with the U bolts to the steel pipe. Make sure to tighten both top and
bottom mounting plates to the pipe with U bolts, nuts and spring washers. Tighten the nuts so that
the airbridge Outdoor does not rotate on the pipe. The mounting should be such that the antenna
socket, LED's, Ethernet Cable outlet etc face downward. The airBridge Outdoor is weather proof
box made to NEMA 4 specs. There are no user adjustable parts inside and it is recommended that
the unit is used in the same way it is shipped.
Directional Antenna
airBridge Outdoor
AC/DC Adapter
RJ-45 Ethernet Port
1.5 Inch pipe
powerShot
RF Cable
Ethernet Cable
U-bolt
MOUNTING THE ANTENNA :
Follow the mounting instructions provided by the antenna manufacturer and mount the antenna on
the
steel pipe. Antenna should be mounted on the same pipe as the airBridge Outdoor and positioned
above
it. The height of the antenna and direction should be in the direction of the Access Point. The
antenna
socket of the airBridge Outdoor and the antenna input have to be connected by an RG 8 N Male to
N
Male cable.
CABLE :
The Ethernet cable is manufactured for outdoor use. One end of the Ethernet cable is permanently
fixed to the airBridge Outdoor unit. The Ethernet cable has to be routed along the pipe, roof, edge
