background image

airPointPRO  can  be  used  as  Access  Point  or  as  Client  Bridge  or  as  Wireless Bridge .The  home  PC  
gets  connected  to  the  internet  through  the  airBridge  Outdoor  and  airPointPRO  Outdoor . The  airPoint  
PRO  Outdoor  is  identical  to  airBridge  Outdoor  .  
 
 

airPoint  Outdoor : 

airPoint  Outdoor  is  wireless  Access  Point . It  operates  at  2.4  GHz  ISM  band  and  conforms  to  IEEE   
802.11b  specs . Using  high  gain  external   Omni / Directional  antenna  it  can  provide  a  range  up  to  32   
Kilometers . It  can  provide  data  rates  upto  11 Mbps . Encryption  capability of  64  bits  or  128  bits  provides   
network  security . airPoint  Outdoor  can  provide  network  connection  to  any   Wi – Fi  compliant  device. 
 
airPoint  Outdoor  can  be  used  as  Client   Bridge  also . The  home  PC  gets  connected  to  the  internet  
through  the  airBridge  Outdoor  as  client  and  airPoint  PRO  Outdoor  or  airPoint  Outdoor  as  Access  
Point . .The  airPoint  Outdoor  is  identical  to  airBridge  Outdoor  .  
The  following  description  up  to   “  Configuration “  is  common  to  airBridge  Outdoor , airPoit  PRO  Outdoor  
and  airPoint  Outdoor . 
 

 

 
 
 

Rooftop Installation 

The airBridge Outdoor can be mounted on the rooftop with the directional antenna pointing towards 
the  Access Point. There is a single Ethernet cable which carries power and data signals from PC. 
This is  permanently fixed to the airBridge Outdoor unit. Other end of the cable is connected to the 
PC through  the powerShot. The AC adapter connected to the powerShot provides the power to the 
airBridge  Outdoor. 

PREPARTION OF THE SITE : 

The wireless waves propagate in straight lines. So it is essential that the antennas connected to the 

Summary of Contents for airBridge Outdoor























Reviews: