Smartbitt SBOL50KTIII-3, Service Manual

Page: 56 / 57

56
12. 1.5 ^C0NNN<0x0d>
This command is to adjust the negative battery voltage sampling value. You can adjust the parameter to
the sampling voltage displayed on LCD and the real battery voltage. The format is:
Computer: ^C0NNN<0x0d>
UPS: (ACK or (NAK*
*: If UPS accepts this command, responds ACK. Otherwise, responds NAK
Voltage adjustment step: <nnn>. n=000, 001……, 999.
For example:
Computer: ^C010BATNV-001<0x0d>
UPS: (ACK
Meanings: Battery sampling voltage will decrease about 0.1%.
12.1.6 ^P004QWS<0x0d>
^P004QWS<0x0d> means to request the current warning of the UPS. The command format is:
Computer: ^P004QWS<0x0d>
UPS: (a0a1……a62a63<cr>
a0,…,a63 is the warning status. If the warning is happened, the relevant bit will set 1, else the relevant
bit will set 0.
Bit Warning
a0 Battery disconnected
a1 Input Neutral loss
a2 Reserved
a3 Input phase abnormal
a4 Reserved
a5 Reserved
a6 Battery over charge
a7 Low battery
a8 Overload
a9 Fan failure
a10 EPO active
a11 Reserved
a12 Over temperature
a13 Charger failure
a14 Reserved
a15 L1 IP fuse broken
a16-a49 Reserved
a50 Locked in bypass after overload 3 times in 30min
a51 Converter current unbalance
a52 Battery fuse broken
a53 Inverter inter-current unbalance
a54-a56 Reserved
a57 Cover of maintain switch is open
Example:
Computer:
^P004QWS<0x0d>