SMART SmartBoard 600 Series, User Manual

Page: 20 / 56

12 Before Installing Your 600i2 Interactive Whiteboard System 99-00850-21 A0
Securing the Pen Tray and Interactive Whiteboard
Because the pen tray that comes with your SMART Board interactive whiteboard is detachable, you may want to
safeguard it—and the interactive whiteboard at the same time—by anchoring it with a security cable.
IMPORTANT
To lock the pen tray to the interactive whiteboard
Underneath the pen tray, there is a lock slot that accommodates a security cable, such as a Kensington® lock.
Lock Slot
Loop the security cable behind the pen tray brackets before you screw them to the wall, and then thread the lock
end of the cable through the loop end of the cable. Verify that the cable is tight enough to prevent you from
removing the pen tray while the lock is in place. Install the pen tray. Insert the prong-end of the security cable into
the lock slot and then complete the pen tray installation.
To secure the pen tray to the pen tray brackets
Because you can remove the pen tray without tools, you may want to securely attach it to its brackets. To do this,
you can insert two No. 8/M4 screws (not included) into the holes shown in the illustration below. Note that older
pen trays don’t have this feature.
Screw Location
Securing the pen tray can provide theft deterrence for the interactive whiteboard as well.
The screws that secure the interactive whiteboard to the wall are located directly behind the pen
tray. The pen tray must be removed before you can remove the interactive whiteboard. When
you secure the interactive whiteboard, you also secure the pen tray.