Smart Technologies SMART kapp iQ Pro 55, Administrator'S Manual, Page: 98 / 118

APPENDIX E
REMOTELY MANAGING THE INTERACTIVE FLAT PANEL
86 smarttech.com/kb/171000
Use the following commands to assign power state settings.
Command Possible values Response Standby
mode
set powerstate [Value] =on
=off
=standby
powerstate= [Value] Yes
Source
Use the following commands to identify source settings.
Command Response Possible values Standby
mode
get input input= [Value] hdmi1
ops/hdmi2
Yes
get videoinputs videoinputs= [Value] hdmi1
ops/hdmi2
Yes
Use the following commands to assign source settings.
Command Possible values Response Standby
mode
set input [Value] =hdmi1
=ops/hdmi2
=next
input= [Value] Yes
Video
Use the following commands to identify video settings.
Command Response Possible values Standby
mode
get displaymode displaymode= [Value] standard
user
dynamic
No
get contrast contrast= [Value] 0–100 No
get brightness brightness= [Value] 0–100 No
get tint tint= [Value] 0–100 No
get sharpness sharpness= [Value] 0–100 No