Smart Technologies SMART kapp iQ Pro 55, Administrator'S Manual

Page: 105 / 118

APPENDIX E
REMOTELY MANAGING THE INTERACTIVE FLAT PANEL
93 smarttech.com/kb/171000
Use the following commands to assign source settings.
Command Possible values Response Standby
mode
set input [Value] =hdmi1
=hdmi2
=displayport
=ops/hdmi
=ops/displayport
=next
input= [Value] Yes
set videoinputdetect [Value] =ops/hdmi
=ops/displayport
=off
videoinputdetect= [Value] No
Video
Use the following commands to identify video settings.
Command Response Possible values Standby
mode
get displaymode displaymode= [Value] standard
user
dynamic
No
get contrast contrast= [Value] 0–100 No
get brightness brightness= [Value] 0–100 No
get tint tint= [Value] 0–100 No
get sharpness sharpness= [Value] 0–100 No
get colortemp colortemp= [Value] normal
warm
cool
user
No
get red red= [Value] 0–100 No
get green green= [Value] 0–100 No
get blue blue= [Value] 0–100 No
get blacklevel blacklevel= [Value] 0–100 No
get localdimming
3
localdimming= [Value] on
off
No
3
SMART kapp iQ Pro 75 interactive flat panels only