Smart Technologies SMART kapp iQ Pro 55 Administrator'S Manual Download Page 14

Page: 14 / 118

CHAPTER 1

WELCOME

smarttech.com/kb/171000

How to set up the interactive flat panel

How to maintain the interactive flat panel for years of use

How to troubleshoot issues with the interactive flat panel

In addition, this guide includes information on the interactive flat panel’s remote management

support and on-screen display menu.

This guide is intended for individuals who install and maintain interactive flat panels in their

organizations. Other documentation and resources are available for individuals who use

interactive flat panels.

About the interactive flat panel

The SMART kapp iQ Pro interactive flat panel features SMART’s proprietary DViT® (Digital Vision

Touch) technology on an LCD screen with e-LED backlight.

Models

Four models of SMART kapp iQ Pro interactive flat panel are available:

SMART kapp iQ Pro 55

SMART kapp iQ Pro 65

SMART kapp iQ Pro 65-V2

SMART kapp iQ Pro 75

Differences among these models are noted in this guide.

Specifications

Refer to the interactive flat panel’s specifications for detailed technical information, including

product dimensions and weights.

Summary of Contents for SMART kapp iQ Pro 55























































































































Search results

Summary of Contents for SMART kapp iQ Pro 55

Reviews:

Related manuals for SMART kapp iQ Pro 55

Brands by name

Popular brands

Smart Technologies SMART kapp iQ Pro 55, Administrator'S Manual

Search results

Summary of Contents for SMART kapp iQ Pro 55

Reviews:

Related manuals for SMART kapp iQ Pro 55

Brands by name

Popular brands