Submenu setting
Description
Startup Screen
Sets the type of startup screen to
SMART
or
User
. The
SMART
screen is the default SMART logo on a blue background. The
User
screen uses the saved picture from the Capture User Startup Screen
function.
High Speed Fan
Adjusts the speed of the projector’s fan. Select
High
or
Normal
.
N O T E
Use the High setting when the projector’s temperature is high or the
altitude is above 6000' (1800 m).
Projector Mode
Adjusts the projection mode to
Front
,
Ceiling
,
Rear
or
Rear Ceiling
.
I M P O R T A N T
SMART recommends that you never change this setting from the
Ceiling
projection mode.
Source
Adjusts the input source to
VGA-1
,
VGA-2
,
Composite
,
S-Video
or
HDMI
.
USB Control settings
This menu allows you to associate a video source with a USB receptacle on the ACP.
Submenu setting
Description
USB1 Source
Enables touch for the selected video source (
VGA-1
,
VGA-2
,
HDMI
or
Disabled
) by associating the video source with the room computer
USB receptacle (USB1) on the ACP.
USB2 Source
Enables touch for the selected video source (
VGA-1
,
VGA-2
,
HDMI
or
Disabled
) by associating the video source with the laptop USB
receptacle (USB2) on the ACP.
T I P
These settings are only available for SMART UX60 projectors running DLP firmware version
1.0.0.4 or later.
Network settings
This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP is not used.
A P P E N D I X
A
Remotely managing your system through a network interface
73
