A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
62
Field definitions
Field
Possible values
Description
current netstatus
l
connected
l
disconnected
Current status of the network interface
current network
l
on
l
off
Current status of the network module and the
VGA output
target network
l
on
l
off
Enable/Disable network module and VGA
output
current dhcp
l
= on
l
= off
Enable/Disable for DHCP Networking
target dhcp
l
on
l
off
Enable/Disable for DHCP Networking
current ipaddr
Range: 0.0.0.0 to
255.255.255.255
Current IP address (static or dhcp assigned)
target ipaddr
= Range: 0.0.0.0 to
255.255.255.255
Set to static IP Address
current subnetmask
Range: 0.0.0.0 to
255.255.255.255
Current subnet Mask
target subnetmask
= Range: 0.0.0.0 to
255.255.255.255
Target subnet Mask
current gateway
Range: 0.0.0.0 to
255.255.255.255
Current gateway
target gateway
= Range: 0.0.0.0 to
255.255.255.255
Target gateway
current primarydns
Range: 0.0.0.0 to
255.255.255.255
Current primary dns
target primarydns
= Range: 0.0.0.0 to
255.255.255.255
Target primary dns
MAC address
xx-xx-xx-xx-xx-xx
The device’s MAC address.
System information
Use these commands to set your system information.
Command/response definitions
Command
Response
Powered off
set autosignal [target]
autosignal=[current]
no