C H A P T E R 3
Using your interactive whiteboard system
17
Setting
Use
Notes
Contact
Displays the contact name
or number for projector
support as set by an
administrator (maximum 16
characters).
You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface
managing your system through an RS-232
serial interface
Language menu
Language
Selects language
preference.
Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Information menu
Lamp Hours
Displays the current number
of lamp usage hours from 0
to 4000 hours from when it
was last reset.
Always reset the lamp hours after you replace
a lamp, because lamp service reminders are
based on the current hours of use. See
on page 27 for
details on the lamp hours reset procedure.
Input
Displays the currently
displayed video input source
(
VGA-1
,
VGA-2
,
HDMI
or
None
).
Resolution
Displays the projector’s
most recently detected video
source signal resolution and
refresh rate.
If there is no current video input source signal,
this setting displays the last known source
signal image resolution and refresh rate.
Firmware
Version
Displays the projector’s
digital display processor
(DDP) firmware version in
x.x.x.x format.
MPU Version
Displays the projector
microprocessor unit (MPU)
firmware version in x.x.x.x
format.
Network
Version
Displays the projector’s
network communications
processor firmware version
in x.x.x.x format.
If you haven’t enabled the
Network and VGA
Out
setting, this setting is unable to display
the projector’s network communications
processor firmware version and displays
0.0.0.0 instead.
Model Number
Displays the projector’s
model number.
Serial Number
Displays the projector’s
serial number.
