A P P E N D I X A
Remotely managing your system through a network interface
47
Submenu setting
Description
CC
Displays or allows you to set the email address of the email alert
“copy to” recipient.
From
Displays or allows you to set the email address of the user who
sends the email alert.
Subject
Displays or allows you to set the email alert subject.
Outgoing SMTP server
Displays or allows you to set the Simple Mail Transfer Protocol
(SMTP) server that you use on your network.
Username
Displays or allows you to set the SMTP server user name.
Password
Displays or allows you to set the SMTP server password.
Alert Condition
Sends email alerts whenever
Lamp Warning
,
Low Lamp Life
,
Temperature Warning
and
Fan Lock
conditions occur. Select
the settings that you want and then click
Submit
.
N O T E
The projector sends an alert email (SMART Alert) to your email
address. Click
Email Alert Test
to confirm that your email
address and SMTP server settings are correct by sending a test
email (SMART Alert-Test Mail).
If the settings aren’t correct, the email alert messages aren’t
sent or received successfully and warnings and notification
message aren’t available to advise of this state.
Password settings
This menu provides a security function that allows an administrator to manage projector use and
enable the administrator password function.
Submenu setting
Description
Password
When the password function is enabled, the administrator
password is required to access Web Management. Select
Disable
to allow remote web management of the projector without
requiring a password.
N O T E S
l
The first time you enable the password settings, the default password value is four
numbers, for example, 1234.
l
The maximum allowable password length is four numbers or letters.
l
If you forget the projector password, refer to
on page 39 to
set the projector setting to factory defaults.