C H A P T E R 5
Troubleshooting your interactive whiteboard system
40
Resetting the projector
At some point during troubleshooting, you might need to reset all projector settings.
I M P O R T A N T
This action is irreversible.
To reset all projector settings
1. Using the remote control, press the following buttons quickly to access the service menu:
Down
,
Up
,
Up
,
Left
,
Up
.
2. Scroll to
Factory Reset
and then press
Enter
on the remote control.
3. Scroll to
Exit
and then press
Enter
on the remote control to exit the projector service menu.
Transporting your interactive whiteboard
system
Save your original interactive whiteboard system packaging so that it’s available if you need to
transport your interactive whiteboard system. When required, repack it with all of the original
packaging. This packaging was designed to provide optimal shock and vibration protection. If you
no longer have your original packaging, purchase the same packaging directly from your
authorised SMART reseller.
If you prefer to use your own packaging materials, make sure that you adequately protect your
unit. Make sure that the projector lens and mirror are protected against any physical contact or
pressure which may damage the projector’s optics. Send your interactive whiteboard in an upright
position to deter carriers from placing heavy objects on it.
