2000i Installation Guide
39
Orientation > Ceiling Rear
to orient the projected image for desktop (as opposed to ceiling)
rear projection
Background > Logo
to select the SMART logo to serve as the standby screen
6. Click
the
Page 4
tab and select:
Auto Adjust
to automatically determine the best resolution for the current RGB input signal,
compensating for resolution differences among input devices (such as guest laptops)
Power Management
to automatically shut down the projector when no RGB input signal is
received from the computer (or any other source). This helps conserve the life of your projector
lamp.
Idle Mode
to allow the RGB OUT connector to output RGB signal during Idle mode
7. De-select
Built-in Speaker
to mute the projector's speakers
8. Click
the
Page 6
tab and select:
Default Source Select > Select > RGB1
to make RGB1 the default display source each time
the projector starts up
9. Select
Projector Options > Lamp Setting > Lamp
Mode > Normal
to set the projector lamp
to optimal brightness for the 2000i.
10. Select
Projector Options > Auto Functions
.
11. De-select
Focus
because the custom lens of the projector only permits manual focus
adjustment.
12. Select
Projector Options > Screen > 4:3
to enable a standard aspect ratio.
13. Click
OK
to save these settings.
