SMART Board 800i6, Configuration And User'S Manual

Page: 48 / 115

Chapter 5
35
Chapter 5: Maintaining your interactive
whiteboard system
Maintaining your interactive whiteboard 35
Cleaning the projector 35
Focusing and adjusting the projector image 36
Replacing the projector lamp 37
Removing and replacing the projector lamp module 37
Resetting the lamp hours 40
This chapter includes methods for properly cleaning and preventing damage to your SMART
Board 480i6 interactive whiteboard system.
Maintaining your interactive whiteboard
For information on maintaining your interactive whiteboard, see the SMART Board 800 series
interactive whiteboard user’s guide ( smarttech.com/kb/144817 ).
Cleaning the projector
W A R N I N G
Cleaning a wall-mounted projector can result in a fall or injury. Use caution when climbing a
ladder and consider removing the projector from its wall-mounting bracket to clean it.
C A U T I O N
l
Never touch the mirror with your hands or a brush, and do not scrub the surface of the
mirror with the supplied cleaning cloth. Instead, use the supplied cleaning cloth to clean
the mirror with a light touch, and do not put any cleaning solvents on the cloth or the mirror.
Do not apply pressure to the projector lens or mirror.
l
Before you clean the projector, press the Power button twice on the ECP or remote
control to put the system in Standby mode and then allow the lamp to cool for at least 30
minutes.