SMAR LD290, Operation And Maintance Manual

Page: 26 / 66

LD290
– Operation and Maintenance Instruction Manual
3.4
Figure 3.3 shows branch CONF with the available options.
Figure 3.3
– Local Adjustment Configuration Tree
* NOTE
Among the units shown by LD290 only the units from Table 3.3 are valid.
Configuration Branch (CONF)
Z: Moves to the TRIM branch.
S: Enters the CONFIGURATION branch, starting with function display (LCD_1).
Display 1 (LCD_1)
Z: Moves to the function Display 2 (LCD_2).
S: Starts selection of variable to be indicated as primary display.
After activating ( S ), you can move around the options available in the following
table by activating ( Z ). See table 3.3.
The desired variable is activated using ( S ). Escape leaves primary variable
unchanged.
Display 2 (LCD_2)
Z: Moves to the RANGE function.
S: Starts selection of variable to be indicated as secondary display.
The procedure for selection is the same as for LCD_1, above.
CURRENT CURRENT IN MILIAMPÈRES
CO Analog Output Current in mA
PR Pressre in pressure unit.
PV% Process Variable in percentage.
PV Process Variable in engineering units.
TE Ambient temperature.
NONE - No variable on display (only LCD_2)
ESC Escape.
Table 3.3 - Display Indication