SMAC
LAC-25 Technical Reference Manual
68
Command:
EN
-- Echo On --
Default:
Echo On
This command causes characters received from the serial communication's interface to be
echoed as they are received. It is normally used in the full-duplex mode of operation in serial
communications.
Related Commands: EF
Command:
GAn
-- Get A/D Channel
Argument:
0 <= n <= 9
This command will cause a conversion on A/D channel 'n' and will store the result in the
bottom 10 bits of the accumulator. Unused bits will be set to 0.
Related Commands: TA
Command:
HF
-- Hardware Handshaking Off --
Default:
Hardware handshake off
This command does not function and is retained for backward compatibility reasons.
Command:
HM
-- Hexadecimal Mode --
Default:
Decimal Mode
This command causes all numerical input and output to be interpreted as hexadecimal or
base 16. Numbers will be output as 2, 4 or 8 digits with leading 0's if they are positive and leading
F's if they are negative.
Related Commands: DM
Command:
HN
-- Hardware Handshaking On --
Default:
Hardware handshake off
This command does not function and is retained for backward compatibility purposes.