6 - Install Batteries
4
BATTERY
COMPARTMENT
CONTROL MODULE
A
Insert four (4) AA-size Alkaline Batteries provided as indicated by the
(+) and (—) symbols inside the Battery Compartment.
4 - Mount Control Module to Wall
5 - Control Module Connection
B
Insert Locking Connector from Solenoid Valve into mating Receptacle.
C
Insert Connector from Faucet Spout into Modular Receptacle.
E
Insert each Cable into a Strain Relief Slot.
B
Mount Control Module to wall using Mounting Screws and Plastic
Anchors.
A
Install the Control Module in an appropriate location. Control Module
must be installed so that all cables enter from the bottom of the unit.
When installed, Cables from the Spout and Solenoid Valve to the
Control Module should have some slack.
A
Route Cables from Solenoid Valve and Spout to the Control Module.
CONTROL
MODULE
ENCLOSURE
FROM SOLENOID VALVE
FROM ADAPTER
STRAIN
RELIEF
SLOTS
FROM FAUCET SPOUT
POWER CABLE
JACK
4” (102 mm)
MODULAR
RECEPTACLE
LOCKING
CONNECTOR
FOUR (4) AA-SIZE ALKALINE BATTERIES
D
Insert Power Cable Jack from Adapter (optional) into Receptacle.
7 - Plug in Adapter (Optional)
A
Plug Adapter into Receptacle.
ADAPTER
(OPTIONAL)
