SLE SLE2000 HFO, Service Manual, Page: 8 / 84

SLE2000 HFO Service Manual
Doc No. SM/0001: Issue 7.0
Page 8 of 84
2.5 P
OWER
, D
IMENSIONS ETC
.
Voltage : 100-250V/ 50-60Hz
Power : 120VA
Fuses : 220-250V~50-60Hz : Fuse T1.0A
100-120V~50-60Hz : Fuse T2.0A
Air and O
2
: 3-5 bar
Operating Environment: Temp: 10-40°C
Humidity: 0-90% (non condensing)
Size, Ventilator only : 37cms W × 39cms H × 32cms D
Height on pole: 141cms
Weight Ventilator Only: 16 Kgs
Constructed to conform to: IEC 601/1 and 601/2
BS 5724 Parts 1 and 2
Patient Circuit Required: Model : N2188 Single use
Model : N2200 Re-usable
3. M
ODULE
D
ESCRIPTIONS
3.1 E
LECTRONIC
M
ODULE
Position of the boards within the
electronic module.
1) HFO Main Board Assembly
(A0736/01)
2) Ventilator CPU Board Assembly
(A0702/02)
3) Motor Drive Board Assembly
(A0739/01)
4) Alarm Board Assembly (A0738) (Not
visible from photo. - mounted on back
panel.)
Note: Boards 1,2, and 3 are polarised by
the position of the edge connectors thus
preventing the boards being inserted into
the wrong sockets.
Board positions within the electronic unit