116
4.6.3.3 Formula unit
The formula unit can be selected in the
Unit
submenu.
Fig. 73
Once the selection made (e.g. %), the unit will also be displayed as piece of information on the
display.
Fig. 74
4.6.3.4 Decimal places
To conclude, it is possible to determine the number of decimal places from 1-6.
The standard setting is 2.
4.6.3.5 Global Memories
If a titration result is to be used again later, such as the factor or titer of a solution or a blind value, this
can be saved automatically. The creation of a global memory is only possible if an external keypad is
used. The creation of a global memory is possible in the system settings or by pressing Shift+F5 on
the external keypad. This will take you to the <Global Memories>:
Fig. 75
