16
Starting from the enclosure door, lift one of the assembled poles and insert the straight tube
(11)
into the socket. Repeat
this process to assemble the three remaining poles.
Helpful tip: When inserting the enclosure poles, pull back on the middle of the poles!
STEP 20
STEP 19
Next insert a curved tube
(10)
into the pole cap
(13)
. Make sure
the bend
of the
enclosure poles are
facing out away from the center
of the trampoline. Make sure
the holes on the curved tube, pole cap, and strap ring are all aligned. Then insert
a M5x44mm bolt
(16)
to secure in place.
Important: Make sure the bolt goes into
the round hole FIRST (not the hexagon hole) or you could break the pole cap!
Repeat
steps 18-19 to assemble the remaining pole caps.
M5x44mm Bolt
(x4)
16
(13)
(10)
(16)
Strap
Socket
Socket
Pull back
ASSEMBLY
bend facing out
