12
STEP 12
Next, place four springs into the
V-rings just left of the four sockets
, and stretch the
springs until they reach the
frame holes just left of the sockets.
You now have attached eight V-rings to the frame holes using eight springs.
There
should be seven V-rings and seven frame holes in between each spring.
Springs
(x4)
9
Socket
(9)
Enclosure door
STEP 11
Next, locate the remaining T-joints between the two placed springs
.
Place a spring
into the
V-ring just left of one of the T-joints
, and stretch the spring until it reaches the
frame hole just left of the T-joint.
Now,
repeat this step
on the
other side
of the trampoline. You now have attached four
V-rings to the frame holes using four springs.
Pro tip: Starting from a previously placed spring, count the exact number of V-rings
and frame holes to ensure each one corresponds. This will help to prevent any
misalignments!
Springs
(x2)
9
(9)
T-joint
T-joint
(9)
Enclosure door
ASSEMBLY
